Android Repair – Complete Guide To Repair And Bring Back Android System To Normal

Are you facing some issues in your Android device like force restarting, crashing, the device gets frozen, unknown error codes, stuck in download mode, stuck at Android logo, etc.? If YES, then Android System Repair will solve all these issues on your Android phones and tablets.

Android Repair tool is designed to repair many Android system problems only in few simple clicks. Go through this article and know-how use this Android Repair tool. Before going to the steps you need to first download and install Android Repair Software on your computer.

Launch Android Repair software and click on “Start” button from the main screen.

Step 1: Enter Details For Your Android Device And Download Firmware

Once you clicked on the Start button, you will need to enter the details of your Android phone/tablets to download the correct firmware. You can see the below picture. After entering the important details click on the “Download Firmware” button.

The software will then automatically download and extract the firmware for your device.

When the extraction process gets over, confirm the entered info is correct. If any detail is wrong then correct it. If you don’t do this then the software may not fix the issue but instead, it can damage your phone. And the fixing process may cause your information to be wiped as well.

Step 2: Connect your Android Device To Your PC And Enter It In Download Mode

When the device info is right then hit on “Start” button.

Connect your Android device to your PC using a USB cable. Please check that your mobile is in “Download Mode” in order to fix it. After your device entered download mode, the software will start fixing your Android device by itself.

If your smartphone has a Home button, then follow the below steps:

  • Power OFF your device
  • Press and hold the Volume Down + Home + Power buttons simultaneously. Continue pressing the buttons unless the warning message appears on the phone’s screen.
  • Then put your phone in download mode by pressing the Volume Up key.

If your phone has not a Home key, then follow the below steps:

  • Power OFF your smartphone by holding the Power button.
  • Then press and hold the Volume Down + Bixby + Power buttons simultaneously. Continue pressing the buttons unless the warning message appears on the phone’s screen.
  • Then put your phone in download mode by pressing the Volume Up key.

If still your Android phone/tablet has not entered in download mode then here you can read this article – How To Put Samsung Devices In Download Mode

Step 3: Repair Your Android Operating System (OS)

When your device successfully entered into download mode then the software will automatically fix all the issues from your Android OS. Please do not disconnect your device from the computer when this process is going on. If you do this then this may brick/damage your Android phone or tablet.

When your device gets repaired then it will restart by itself.