iPhone Unlock – Complete Guide To Remove Various Locks From iPhone/iPad/iPod touch

Have you forgotten your iCloud account, Apple ID, iPhone screen lock passcode or screen time passcode? Or have your iDevice got locked by MDM? Keep Calm! iPhone/iPad/iPod touch Unlock software removes all types of lock and issue. This program has 4 modes. Just read the article and unlock your iPhone, iPod or iPod Touch.

Part 1: Remove Apple ID

Step 1: Install iOS Unlock Software

On your computer launch iPhone Unlock software and select “Unlock Apple ID” mode from the home screen.

Now, with USB cable connect your iDevice to your computer. Unlock your device lock screen and click on “Trust” on your iPhone to trust your computer if you have not done this earlier.

Step 2: Unlock Apple ID

Hit on “Start to Unlock” button to unlock Apple ID and iCloud account of your iPhone, iPad or iPod Touch.


Case 1: If Find My iPhone is Disabled – Supports All iOS Versions

If Find My iPhone is disabled on your iOS device, iOS Unlock software will instantly begin to remove your iPhone/iPad/iPod Touch.

It will just take a few seconds, just wait for the software to unlock your device.


Case 2: If Find My iPhone is Enabled – Supports Below iOS 11.4

If Find My Device is enabled on your smartphone then you need to reset all settings of your device. To do this simply go to Settings > General > Reset All Settings. Then confirm to reset all your device settings. Then your phone will restart and at last, the software will begin to remove your Apple ID and iCloud account.

After completing the process, your Apple ID and iCloud account will not be registered in your phone. Now, you can easily change your Apple ID or create a new Apple account.


Case 3: If Two-Factor Authentication is Enabled – Support iOS 11.4 and later

If Two-Factor Authentication is enabled or ON then you need to manually confirm it by going to Settings > Apple ID > Password & Security. If it is ON then hit on “Yes” to proceed. And check that you have previously set up the screen lock passcode.

Step 1: Download The Firmware Package

The software will automatically detect your phone model. Select the given firmware version and click on “Download” button.

If you re failed to download the firmware then download it in the browser by clicking on “Copy” button.

If it has downloaded then apply it by clicking on “Select” button.

This process will take a few minutes to download and verify the firmware package.

Once the verification gets completed, hit on “Start to Extract” button and wait unless it gets finished.

Step 2: Remove Apple ID

Now, click on “Start Unlock” button and check that your iDevice is connected to your computer using USB cable while doing this step.

Read the notice provided on the screen and enter “000000” to again confirm that you want to remove your iOS device screen lock. After that click on “Unlock” and your device will boot into Recovery Mode by itself.

If your device failed to boot into Recovery mode by itself then you can manually do this by following the instruction.

Wait for a few minutes to complete the unlocking Apple ID.

Step 3: Set Up Your iPhone/iPad/iPod Touch

When your device restart then set up it. Then a page will display on the screen click on “Unlock with Password”.

Next, click on “Use Device Passcode” and enter your screen passcode. Then you can use a new Apple ID and access your iPhone/iPad/iPod Touch.


Part 2: Unlock iPhone Lock Screen Passcode

Have you forgotten your iPhone passcode or entered the wrong passcode many times and it gets disabled? iPhone Unlock software will remove your iPhone or iPod lock screen passcode without entering the previous passcode. This program will unlock any type of screen lock from your device.

Step 1: Launch iPhone Unlock Software

Launch iPhone Unlock software on your computer and click on “Unlock Screen Passcode” mode from the main screen.

Then click on “Start” button.

Note:

  1. After unlocking the device all your device data will be wiped from your device.
  2. Your device will be updated to the latest iOS version.
  3. Remember that your phone is always connected to your computer during the process.

Use USB cable to connect your iOS device to your computer. After that hit on “Next” and the program will start to load the device details.

If your device is not detected, then put your device into Recovery Mode/DFU mode manually to make your device detected.

Step 2: Download The Firmware Package

The tool will automatically detect your device model. Select the given firmware package and hit on “Download” button.

If you failed to download the firmware then download it in the browser by clicking on “Copy” button.

If it has downloaded then apply it by clicking on “Select” button.

This process will take a few minutes to download and verify the firmware package.

Once the verification gets over, hit on “Start to Extract” button and wait unless it gets finished.

Step 3: Unlock Locked Screen Passcode

Now, click on “Start Unlock” button and check that your iDevice is connected to your computer using USB cable while doing this step.

Read the notice provided on the screen and enter “000000” to again confirm that want to remove your iOS device screen lock. After that click on “Unlock” and your device will boot into Recovery Mode by itself.

If your device fails to enter into Recovery mode by itself then you can manually put your device into DFU Mode/Recovery Mode.

Wait for a few minutes to complete the unlocking process.

Done! Your iOS device screen lock passcode is removed and you can access your device.


Tips: Enter Into DFU Mode Or Recovery Mode

If your device fails to detect loading device detail or unlocking process then you need to enter your device in DFU or Recovery Mode.

Select your iOS device model “Other iDevice”/ “iPhone 7/7 Plus”/”iPhone 8 or later” at the top of the screen. And boot the device the DFU mode by following the onscreen steps.

If you failed to do this then click on “put your device into Recovery Mode” at the bottom to put it into Recovery mode.

Select your iOS device model “Other iDevice”/ “iPhone 7/7 Plus”/”iPhone 8 or later” at the top bar to get the steps to enter into Recovery Mode.

Part 3: Unlock Screen Time Passcode

Have you forgotten the restriction passcode or screen time passcode on your iOS device? iOS Unlock software will disable or bypass these types of passcode without losing data from your device.

Step 1: Launch iOS Unlock Software

Launch iPhone Unlock software on your computer and click on “Unlock Screen Time Passcode” mode from the main screen.

Step 2: Connect Your iOS Device To Your Computer

With the help of USB cable connect your device to your computer.

If it fails to recognize then click on “Your iDevice can’t be recognized?” to fix it.

Unlock your device lock screen and click on “Trust” on your iPhone to trust your computer if you have not done this earlier.

Step 3: Unlock Screen Time & Restrictions Passcode

Once your device gets recognized, “Unlock Screen Time Passcode” screen will appear if your device is running on iOS 12 or above or “Recover Restrictions Passcode” will appear if your device is running on iOS 11 or earlier versions.

State 1: Bypass Screen Time Passcode On iOS 12 & Later

Hit on “Start to Unlock” button and continue.

You need to disable Find My iPhone to remove the screen time passcode. So, if Find My iPhone is enabled on your device then to disable, follow the onscreen steps and then click on “Continue”.

If Find My iPhone is disabled on your device, then the software will automatically start to remove the Screen Time Passcode on your device.

Wait for a few minutes, the program will begin to unlock your device’s screen time passcode.

When the unlocking process gets completed, reset your device. While setting it, you need to follow the onscreen steps to confirm that the screen time passcode is unlocked completely.

State 2: Recover Restrictions Passcode on iOS 11 & Earlier Versions

Click on “Start to Unlock” and continue.

The software will begin loading your device data. Make sure that your device and computer are connected while doing this.

Note:

If your iTunes backup has been encrypted then decrypt the backup by entering the password. If you forget the right password then you need to click on “Click Here” to recover the restriction passcode in another method.

Once your device data loaded completely, Unlock iPhone tool will begin recovering the restriction passcode on your iOS device. Wait for few minutes to complete the process.

Once the program completes this process, you will see the recent restriction passcode of your smartphone. You can unlock the restriction passcode and change the restriction settings by going to Settings > General > Restrictions.


Part 4: Remove Mobile Device Management (MDM)

Have your iPhone/iPad/iPod Touch locked out of MDM screen or it have any MDM restriction on your device? Don’t Panic! iOS Unlock program will disable the MDM passcode in 3 easy steps in few seconds.

Step 1: Launch iPhone Unlock Software

Launch iPhone Unlock toll on your computer and click on “Bypass MDM” mode.

Step 2: Connect Your iOS Device To Your Computer

Use USB cable to connect your iOS device to your computer.

Note: After connecting, make sure to trust the computer.

If your phone is locked out of MDM screen then click “Start to Bypass”  to proceed.

To remove the MDM restriction you need to factory reset your device. So, to do this go to Settings > General > Reset > Erase All Content and Settings. After that hit “Start to bypass”.

Step 3: Bypass MDM

If your device is running on iOS 13.4 or later then the program will be preparing your device for bypass.

Now, the software will instantly remove MDM on your device.

When this gets completed, your device MDM has been unlocked successfully.

Note:

After bypassing if you reset your device then the MDM will display again. You can use iPhone Unlock software on your same phone till the license gets over.

Scroll to Top